Area
Facultad de Ingeniería
Department
Mechanics, Design and Industrial Management
Email:
alberto.murillo@deusto.esFollow me:
Alberto Murillo is an Industrial Engineer, holds a PhD from the University of Deusto, and is an Expert in Finite Elements from UNED. His research has focused on FEM simulation of manufacturing processes, the characterization of metal alloys at high temperatures, and their tribological behavior. After his thesis on perforating seamless tubes, he extended his interest to friction stir welding, other forming processes, and near-solidus forming (NSF). He currently leads projects aimed at improving sustainability and reducing energy consumption in metal forming processes by applying NSF, also in components for the wind energy sector, and is exploring new technologies for recycling metal chips through Thermal-CloseDie-Extrusion (TCX). He has published 18 JCR articles, 3 book chapters, and participated in 8 international conferences, in addition to collaborating on projects funded by the EU, Carbon Trust, and other entities.
CVArticles in Scientific Journals
Tribological behaviour of DIN 1.2740 hot working tool steel during mandrel mill stretching process / Tribology International
Aghajani Derazkola, Hamed; Fauconnier, Dieter; Kalácska, Ádám; García Gil, Eduardo; Murillo Marrodán, Alberto; De Baets, Patrick
ISBNAR: 0301-679X / Volume: 202 / Journal number: 110361 / Start page: 1 / End page: 20 / Date: 2025
Effect of warm forming process parameters on 42CrMo4 skew rolled bar mechanical properties and microstructure / ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
Murillo Marrodán, Alberto; Bulzak, Tomasz; García Gil, Eduardo; Aghajani Derazkola, Hamed; Majerski, Krzysztof; Pater, Zbiniew
ISBNAR: 1644-9665 / Volume: 24 / Journal number: 2 / Date: 2024
Analysis of super Cr13 stainless-steel internal fracture growth effects during skew mill piercing process / Results in Engineering
Aghajani Derazkola, Hamed; García Gil, Eduardo; Murillo Marrodán, Alberto
ISBNAR: 2590-1230 / Volume: 21 / Start page: 1 / End page: 15 / Date: 2024
Effects of skew rolling piercing process friction coefficient on tube twisting, strain rate and forming velocity / Journal of Materials Research and Technology
Aghajani Derazkola, Hamed; García Gil, Eduardo; Murillo Marrodán, Alberto; Hardell, Jens
ISBNAR: 2238-7854 / Volume: 25 / Start page: 7254 / End page: 7272 / Date: 2023
The effect of temperature and strain rate on the mechanical properties and microstructure of super Cr13 martensitic stainless steel / Journal of Materials Research and Technology
Aghajani Derazkola, Hamed; García Gil, Eduardo; Murillo Marrodán, Alberto; Hardell, Jens
ISBNAR: 2238-7854 / Journal number: 24 / Start page: 3464 / End page: 3476 / Date: 2023
Influence of rGO on the Crystallization Kinetics, Cytoxicity, and Electrical and Mechanical Properties of Poly (L-lactide-co-?-caprolactone) Scaffolds / Materials
Díaz, Esperanza; León, Joseba; Murillo Marrodán, Alberto; Ribeiro, Sylvie; Lanceros-Méndez, Senentxu
ISBNAR: 1996-1944 / Volume: 21 / Journal number: 15 / Start page: 1 / End page: 15 / Date: 2022
Effects of tool?workpiece interfaces friction coefficient on power and energy consumption during the piercing phase of seamless tube production / Journal of Materials Research and Technology
Aghajani Derazkola, Hamed; García Gil, Eduardo; Murillo Marrodán, Alberto
ISBNAR: 2238-7854 / Volume: 19 / Start page: 3172 / End page: 3188 / Date: 2022
Internal crack formation in cross wedge rolling: Fundamentals and rolling methods / Journal of Materials Processing Technology
Bulzak, Tomasz; Pater, Zbigniew; Tomczak, Janusz; Wójcik, Lukasz; Murillo Marrodán, Alberto
ISBNAR: 0924-0136 / Volume: 307 / Date: 2022
Evaluation of nanocomposite structure printed by solid-state additive manufacturing / CIRP Journal of Manufacturing Science and Technology
Aghajani Derazkola, Hamed; Mohammadiabokheili, Rasool; Kordani, Naser; García Gil, Eduardo; Murillo Marrodán, Alberto
ISBNAR: 1755-5817 / Volume: 37 / Start page: 174 / End page: 184 / Date: 2022
Review on modeling and simulation of dynamic recrystallization of martensitic stainless steels during bulk hot deformation / Journal of Materials Research and Technology
Aghajani Derazkola, Hamed; García Gil, Eduardo; Murillo Marrodán, Alberto; Conde Fernandez, Aintzane
ISBNAR: 2238-7854 / Volume: 18 / Start page: 2993 / End page: 3025 / Date: 2022
Analysis of Friction Stir Welding Tool Offset on the Bonding and Properties of Al?Mg?Si Alloy T-Joints / Materials
Memon, Shabbir; Murillo Marrodán, Alberto; Lankarani, Hamid M.; Aghajani Derazkola, Hesamoddin
ISBNAR: 1996-1944 / Volume: 14 / Journal number: 13 / Start page: 1 / End page: 18 / Date: 2021
Review on Dynamic Recrystallization of Martensitic Stainless Steels during Hot Deformation: Part I?Experimental Study / Metals
Aghajani Derazkola, Hamed; García Gil, Eduardo; Murillo Marrodán, Alberto; Meresse, Damien
ISBNAR: 2075-4701 / Volume: 11(4) / Journal number: 572 / Date: 2021
Application of an Incremental Constitutive Model for the FE Analysis of Material Dynamic Restoration in the Rotary Tube Piercing Process / Materials
Murillo Marrodán, Alberto; García Gil, Eduardo; Barco Atutxa, Jon; Cortés Martínez, Fernando
ISBNAR: 1996-1944 / Volume: 13 / Date: 2020
A study of friction model performance in a skew rolling process numerical simulation / International Journal of Simulation Modelling
Murillo Marrodán, Alberto; García Gil, Eduardo; Cortés Martínez, Fernando
ISBNAR: 1726-4529 / Volume: 4 / Journal number: 17 / Start page: 569 / End page: 582 / Date: 2018
An Incremental Physically-Based Model of P91 Steel Flow Behaviour for the Numerical Analysis of Hot-Working Processes / Metals
Murillo Marrodán, Alberto; Puchi Cabrera, Eli Saúl; García Gil, Eduardo; Dubar, Mirentxu; Cortés Martínez, Fernando; Dubar, Laurent
ISBNAR: 2075-4701 / Volume: 8 / Journal number: 2018 / Start page: 269 / End page: 289 / Date: 2018
Chapters of Books
Adaptación de la formación dual tradicional en grados de la facultad de ingeniería a experiencias reales para la empresa. Trabajando para la empresa, cuando una situación excepcional no permite la formación dual en la empresa / Diseño, implementación y recopilación de Buenas Prácticas de cada una de las fases del Modelo de Aprendizaje de la Universidad de Deusto (MAUD)
Conde Fernandez, Aintzane; Murillo Marrodán, Alberto; García Gil, Eduardo; Oyarbide Zubillaga, Aitor
ISBNCO: 978-84-09-43049-9 / Start page: 153 / End page: 162 / Date: 2022
Effects of Tool-Workpiece Friction Condition on Energy Consumption during Piercing Phase of Seamless Tube Production / Achievements and Trends in Material Forming
García Gil, Eduardo; Murillo Marrodán, Alberto; Aghajani Derazkola, Hamed
ISBNCO: 9783035737509 / Start page: 602 / End page: 611 / Date: 2022
Study of Friction Model Effect on A Skew Hot Rolling Numerical Analysis / Transactions on Engineering Technologies. 25th World Congress on Engineering (WCE 2017)
Murillo Marrodán, Alberto; García Gil, Eduardo; Cortés Martínez, Fernando
ISBNCO: 978-981-13-0746-1 / Start page: 377 / End page: 387 / Date: 2018
Supervised Theses
Experimental and numerical characterization of friction in high temperature forming process
Aghajani Derazkola, Hamed
Date: 2024
Study of the Contact Behaviour of Mandrel Oxide Tribo-Layers in the Tube Piercing Process
Murillo Marrodán, Alberto
Congress name: Study of the Contact Behaviour of Mandrel Oxide Tribo-Layers in the Tube Piercing Process / Country: España / Web: https://materialsconferenceeurope.com/ / Publication name: Study of the Contact Behaviour of Mandrel Oxide Tribo-Layers in the Tube Piercing Process / Start date: 2024/10/02 / End date: 2024/10/04
Study on the influence of process parameters on the damage appearance during the push bench elongator process of super Cr13 tubes
García Gil, Eduardo; Aghajani Derazkola, Hamed; Murillo Marrodán, Alberto; Barco Atutxa, Jon
Congress name: Study on the influence of process parameters on the damage appearance during the push bench elongator process of super Cr13 tubes / ISBN: 978-1-64490-313-1 / City: Tolouse / Country: France (European Territory) / Web: https://esaform24.fr/ / Publication name: Study on the influence of process parameters on the damage appearance during the push bench elongator process of super Cr13 tubes / Start date: 2024/04/24 / End date: 2024/04/26
Analysis of oxidized hot working tool steel tribological behavior in tube piercing
Murillo Marrodán, Alberto; Meresse, Damien; García Gil, Eduardo; Moreau, Philippe; La Barbera-Sosa, Jose Gregorio; Dubar, Laurent
Congress name: Analysis of oxidized hot working tool steel tribological behavior in tube piercing / ISBN: 978-1-64490-313-1 / City: Tolouse / Country: France (European Territory) / Web: https://esaform24.fr/ / Publication name: Analysis of oxidized hot working tool steel tribological behavior in tube piercing / Start date: 2024/04/24 / End date: 2024/04/26
Detailed study of tube hot rolling process by means of FEM
García Gil, Eduardo; Llamazares Durán, Gorka; Conde Fernandez, Aintzane; Murillo Marrodán, Alberto; Barco Atutxa, Jon
Congress name: Detailed study of tube hot rolling process by means of FEM / ISBN: 978-164490246-2 / City: Cracovia / Country: Polonia / Publication name: Detailed study of tube hot rolling process by means of FEM / Start date: 2023/04/19 / End date: 2023/04/21
Study of forming defects and failure occurrence in the radial-axial rolling of super duplex stainless steel rings
Murillo Marrodán, Alberto; García Gil, Eduardo; Fernández De Gamboa, Unai; Conde Fernandez, Aintzane; Lozares Abasolo, Jokin
Congress name: Study of forming defects and failure occurrence in the radial-axial rolling of super duplex stainless steel rings / ISBN: 978-1-64490-247-9 / City: Cracovia / Country: Polonia / Web: https://esaform2023.agh.edu.pl/ / Publication name: Study of forming defects and failure occurrence in the radial-axial rolling of super duplex stainless steel rings / Start date: 2023/04/19 / End date: 2023/04/21
Effects of tool-workpiece friction condition on energy consumption during piercing phase of seamless tube production
Aghajani Derazkola, Hamed; García Gil, Eduardo; Murillo Marrodán, Alberto
Congress name: Effects of tool-workpiece friction condition on energy consumption during piercing phase of seamless tube production / City: Braga / Country: Portugal / Web: https://esaform2022.org/ / Publication name: Effects of tool-workpiece friction condition on energy consumption during piercing phase of seamless tube production / Start date: 2022/04/26 / End date: 2022/04/29
Utilización y modos de validación de FORGE® en procesos industriales de perforado de tubos
Murillo Marrodán, Alberto; García Gil, Eduardo
Congress name: Utilización y modos de validación de FORGE® en procesos industriales de perforado de tubos / Country: España / Web: https://www.transvalor.com/en/actualites/detail/tech-day-spain-2020.230.html / Publication name: Utilización y modos de validación de FORGE® en procesos industriales de perforado de tubos / Date: 2020/03/11
Modelling of the Cone-type Rotary Piercing Process and Analysis of the Seamless Tube Longitudinal Shear Strain Using Industrial Data
Murillo Marrodán, Alberto; García Gil, Eduardo; Cortés Martínez, Fernando
Congress name: Modelling of the Cone-type Rotary Piercing Process and Analysis of the Seamless Tube Longitudinal Shear Strain Using Industrial Data / Country: España / Web: https://esaform2019.mondragon.edu/en/home / Publication name: Modelling of the Cone-type Rotary Piercing Process and Analysis of the Seamless Tube Longitudinal Shear Strain Using Industrial Data / Start date: 2019/05/08 / End date: 2019/05/10
Friction Modelling of a Hot Rolling Process by means of the Finite Element Method
Murillo Marrodán, Alberto; García Gil, Eduardo; Cortés Martínez, Fernando
Congress name: Friction Modelling of a Hot Rolling Process by means of the Finite Element Method / ISBN: 978-988-14048-3-1 / City: Londres / Country: Reino Unido / Web: http://www.iaeng.org/WCE2017/index.html / Publication name: Friction Modelling of a Hot Rolling Process by means of the Finite Element Method / Start date: 2017/07/05 / End date: 2017/07/07
A life cycle assessment of a Li-ion urban electric vehicle battery
Genikomsakis, Konstantinos; Ioakimidis, Christos; Murillo Marrodán, Alberto; Trifonova, Atanaska; Simic, Dragan
Congress name: A life cycle assessment of a Li-ion urban electric vehicle battery / Country: España / Web: http://www.evs27.org/ / Publication name: A life cycle assessment of a Li-ion urban electric vehicle battery / Start date: 2013/11/17 / End date: 2013/11/20
Gipuzkoako FORja enpresen BILkura. Simulazio eredu aurreratuen garapena eta gaur egungo arazoak konpontzeko metodologien partekatzea
Murillo Marrodán, Alberto; Conde Fernandez, Aintzane; García Gil, Eduardo
Abstract: COPRECI, S.COOP; ALCORTA FORGING GROUP S.A.; ULMA FORJA, S. COOP.; Industrias GOL S.A. / Start date: 2024/10/01 / End date: 2025/06/01
Desarrollo de una nueva generación de herramientas de guiado para perforación en geotermia profunda
García Gil, Eduardo; Muñoz Quijano, Alaitz; Murillo Marrodán, Alberto; Sunday, John Damilola
Abstract: HEPHAE ENERGY TECHNOLOGY EUROPA SOCIEDAD LIMITADA / Start date: 2024/09/01 / End date: 2024/12/31
Descarbonización de los procesos de fabricación de componentes de acero destinados a la generación de energía eólica off-shore Acrónimo:
García Gil, Eduardo; Achiaga Menor, Beatriz; Asua Vidri, Iñaki; Conde Fernandez, Aintzane; Elejoste Larrucea, Maria Pilar; Murillo Marrodán, Alberto; Nalda Berganza, Raquel; Ruiz Salmon, Israel; Sarria Rubin De Celis, Imanol Josu; Torre Fernandez, Imanol
Abstract: DEPARTAMENTO DE DESARROLLO ECONÓMICO, SOSTENIBILIDAD Y MEDIO AMBIENTE / Start date: 2024/03/07 / End date: 2025/12/31
OPTIMIZACIÓN DEL PROCESO DE FABRICACIÓN DE FORJA MEDIANTE EL DESARROLLO DE UN GEMELO HÍBRIDO DIGITAL CONSIDERANDO LA SOSTENIBILIDAD Y USO DE MATERIALES
Conde Fernandez, Aintzane; García Gil, Eduardo; Lozares Abasolo, Jokin; Murillo Marrodán, Alberto; Sunday, John Damilola
Abstract: DEPARTAMENTO DE DESARROLLO ECONÓMICO, SOSTENIBILIDAD Y MEDIO AMBIENTE / Start date: 2023/09/01 / End date: 2025/03/31
Desarrollo de un modelo FEM simplificado para la parte estructural de un rack de material electrónico embarcado.
Cortés Martínez, Fernando; Achiaga Menor, Beatriz; Marquiegui Govillard, Gonzaga; Murillo Marrodán, Alberto
Abstract: INGETEAM POWER TECHNOLOGY, S.A. / Start date: 2023/04/01 / End date: 2023/09/30
Desarrollo de una célula de producción 4.0 para componentes híbridos con estrategia Zero Deffect Manufacturing (ZDM)
Murillo Marrodán, Alberto; Achiaga Menor, Beatriz; López García, Alejandro
Abstract: AIC - Automotive Inteligence Center / Start date: 2023/02/15 / End date: 2023/07/15
Near Solidus Forging - Low Energy Production of Forged Components
Murillo Marrodán, Alberto; Lozares Abasolo, Jokin; Ortiz-Coronado Lopez, Maria; Sunday, John Damilola
Abstract: Department for Business, Energy and Industrial Strategy, UK Government / Start date: 2023/02/06 / End date: 2025/02/28
Forja sektorearen lehiakortasunaren sustapena simulazio aurreratuaren eta Gipuzkoako enpresen arteko elkarlanaren bidez
García Gil, Eduardo; Conde Fernandez, Aintzane; Elejoste Larrucea, Maria Pilar; Murillo Marrodán, Alberto
Abstract: ALCORTA FORGING GROUP S.A.; CIE Legazpi, S.A.; COPRECI, S.COOP; ULMA CyE S.COOP.; Industrias GOL S.A. / Start date: 2022/09/01 / End date: 2023/12/31
Applied Mechanics- IT1507-22
Elejabarrieta Olabarri, María Jesús; Achiaga Menor, Beatriz; Conde Fernandez, Aintzane; Cortés Martínez, Fernando; Fernández - Caballero Fariñas, Lola; García Barruetabeña, Jon; García Gil, Eduardo; López García, Alejandro; Martinez De Arenaza Polancos, Inger; Mugica Arrien, Aranzazu; Murillo Marrodán, Alberto; Sarria Rubin De Celis, Imanol Josu; Ukar Arrien, Olatz
Abstract: GOBIERNO VASCO. DEPARTAMENTO DE EDUCACIÓN / Start date: 2022/01/01 / End date: 2025/12/31
Simulazio eredu aurreratuen garapena eta forja sektorearen gaitasun lehiakorren sormena enpresa gipuzkoarren elkarlana sustatuz
García Gil, Eduardo; Murillo Marrodán, Alberto
Abstract: Industrias GOL S.A. / Start date: 2021/10/01 / End date: 2022/07/31
Enpresen arteko lankidetza forjaketa?sektorearen lehiakortasuna sustatzeko, simulazio digitaleko tresna aurreratuak aplikatuz
García Gil, Eduardo; Murillo Marrodán, Alberto
Abstract: Diputación Foral de Gipuzkoa / Start date: 2020/10/01 / End date: 2021/09/30
Simulación del estirado de tubo en banco de empuje
García Gil, Eduardo; Conde Fernandez, Aintzane; Murillo Marrodán, Alberto
Abstract: Tubos Reunidos Indusrial / Start date: 2020/09/01 / End date: 2021/12/31
Análisis estructural de la junta de expansión MWL DN-500
Cortés Martínez, Fernando; Murillo Marrodán, Alberto
Abstract: MACOGA S.A. / Start date: 2019/10/01 / End date: 2019/11/30
Cátedra Deusto en Industria Digital - BBK_2019
Goti Elordi, Aitor; Buján Carballal, David; Gaviria De La Puerta, José; Kados, Szilard; Murillo Marrodán, Alberto; Oyarbide Zubillaga, Aitor
Abstract: BBK Fundazioa / Start date: 2019/09/01 / End date: 2020/12/31
Mejora del Proceso de Perforado de Tubos sin Costura a través de Simulación Avanzada y Sensorización (TUBEST)
García Gil, Eduardo; Cortés Martínez, Fernando; Murillo Marrodán, Alberto; Vivanco Gil, Carlos
Abstract: Tubos Reunidos Indusrial; Gobierno Vasco - Departamento De Educación / Start date: 2019/09/01 / End date: 2021/08/31
Simulación del proceso de calibrado de tubos sin costura
García Gil, Eduardo; Cortés Martínez, Fernando; Murillo Marrodán, Alberto
Abstract: Tubos Reunidos Indusrial / Start date: 2019/07/01 / End date: 2020/12/31
"Análisis estructural de la junta de expansión 066518"MACOGA
Cortés Martínez, Fernando; Murillo Marrodán, Alberto
Abstract: MACOGA S.A. / Start date: 2019/03/03 / End date: 2019/05/31
Guest Editor at Special issue in Journal of ¨Materials¨: https://www.mdpi.com/journal/materials/special_issues/Hot_Forming_Manufacturing_Finite_Element_Modeling
García Gil, Eduardo; Murillo Marrodán, Alberto; Aghajani Derazkola, Hamed
Merit type: Mérito De Investigación / Start date: 2021/01/01 / End date: 2021/12/30